Flexible CouplingThe Correct Use Is The Key To Ensuring The Stable Operation Of Equipment, And The Following Points Should Be Noted:
Before Installation, It Is Necessary To Verify That The Model Specifications Match The Design, And Check Whether The Parameters Of The Shaft Hole And Keyway Are Compatible. At The Same Time, Check Whether The Elastic Components Have Cracks Or Aging, And Whether The Metal Parts Are Corroded Or Damaged. Clean The Oil Stains And Rust On The Shaft End And The Inner Hole Of The Coupling, And Measure The Deviation Between The Two Shafts With A Dial Gauge To Ensure That It Is Within The Allowable Compensation Range And Avoid Exacerbating Wear Due To Excessive Deviation.
During Installation, It Is Necessary To Adjust The Concentricity, Prioritize Correcting Radial And Angular Deviations, And Prohibit Forced Installation. When Assembling Elastic Components, Avoid Excessive Stretching Or Compression, Tighten Bolts Symmetrically, Operate According To The Specified Torque, And Take Anti Loosening Measures. The Type That Requires Lubrication Should Be Lubricated With An Appropriate Amount Of Lubricating Oil To Prevent Overheating Due To Friction.
During Operation, Stop The Machine For 1-2 Hours To Check If The Components Are Loose And If The Elastic Elements Are Deformed. Regularly Observe For Abnormal Noise And Vibration, Check For Aging Of Elastic Components And Loosening Of Bolts. If The Load Suddenly Changes Or The Speed Fluctuates, It Is Necessary To Stop The Machine In A Timely Manner. When The Ambient Temperature Is Too High, Take Cooling Measures To Avoid Accelerated Aging Of Elastic Components Due To High Temperature.
When Replacing, If There Are Cracks Or Severe Wear On The Elastic Components, They Must Be Replaced As A Whole In A Timely Manner To Ensure Consistent Performance. If Metal Parts Have Cracks, Severe Deformation, Or Excessive Wear On The Shaft Holes, They Need To Be Scrapped As A Whole. When Replacing The Coupling With A New One, It Is Necessary To Ensure That The Model And Specifications Are Consistent.
Following These Key Points Can Reduce Malfunctions, Extend Service Life, And Ensure Stable Operation Of Equipment.
